How do I setup my Sony PlayStation 3 to work on wireless with Cable ONE internet?
Step 1: In the XMBT home menu, go to Settings, Network Settings, Internet Connection and select Enabled.
Step 2: Scroll down to Internet Connection Settings and press the X button. When prompted, "Do you want to continue?", select Yes. On the next screen, select Wireless as your connection method and press the X button.
Step 3: Pick Scan and press the X button.
Step 4: From the list, pick your SSID and press the X button. On the next screen, press right on the directional pad to continue - do NOT press the X button to Edit.
Step 5: Pick your WLAN Security Setting (either WEP or WPA-PSK/WPA2-PSK). If none, pick None and skip the next step. Press the X button.
Step 6: If you selected a Security Setting, enter your security key with the keyboard. Press the Start button to exit the onscreen keyboard. Press right on the directional pad to proceed to the next screen.
Please click here for help retreiving your wireless passphrase/passcode/key.
Step 7: The system will check your network configuration settings and display the information. Press the X button to save these settings.
Step 8: Test the connection on the next screen. Press the X button to start the test.
Step 9: When the test is complete (usually less than a minute), it will display the results ("Succeeded" or "Failed"). If you have successfully connected to your network, congratulations, you have completed the network setup process. If not, go back through and double check your steps.